BAKERLUX Full Size, Ventless System, 220v

List Price: $3,800.00

Description and Features

The Cadco ventless system is an ideal solution for installing your BAKERLUX™ TOUCH or LED oven anywhere in your kitchen, making it possible to cook when traditional Type-1 hoods and duct-work are impractical or too expensive. This is a vapor capture and condensing system which removes odors and grease laden vapors expelled by the exhaust and when opening the oven door. No outside venting required.

  • Compatible with LED and TOUCH oven models only
  • Includes electro valve for direct plumbed water connection
  • Freight class 200
  • All ventless systems include factory installation unless ordered separately
  • Certified ANSI UL 710B approved recirculating ventless systems
  • *Subject to verification and approval by authorities and local regulations
  • *Ovens equipped with ventless system must have water and electricity connected for it to work as designed. Remove zip tie before use.
  • UL evaluated under the KNLZ category “Commercial Cooking Appliances with Integral Systems For Limiting the Emission Of Greaseladen Air
  • Using EPA test method 202 emissions of grease laden vapor were measured at 0.24 mg/m³. Results are less than the established 5 mg/m³.
  • Please allow 4 inches of clearance in the back and 2 inches of clearance on the side for proper airflow to maximize the performance and to prevent any issues or damages to the product.

Water Connection is required for proper installation, filtration is highly recommended to prevent scale build up. Drain line or floor drain is needed.


Description: Full Size. NEMA 6-15P plug.

Unit Dimensions (W" x H" x D"): 31 1/2 x 10 7/8 x 34

Volts: 208-240

Watts: 200

Amps: 1

Shipping Weight (lbs.): 77




Freight Class: 200. NOTE: All ventless systems include factory installation unless ordered separately

Download Spec Sheet

Download Manual

Product Type Specialties